4.2.0 minor errors

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|

4.2.0 minor errors

Rory O'Farrell
When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,

Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.


 --
Rory O'Farrell <[hidden email]>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Matthias Seidel
See:
https://bz.apache.org/ooo/show_bug.cgi?id=127315

Regards, Matthias


Am 09.02.2018 um 10:24 schrieb Rory O'Farrell:

> When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
>
> Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
>
>
>  --
> Rory O'Farrell <[hidden email]>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Jim Jagielski
In reply to this post by Rory O'Farrell
Can you try the versions from:

    o http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/ <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/>

Thx!

> On Feb 9, 2018, at 4:24 AM, Rory O'Farrell <[hidden email]> wrote:
>
> When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
>
> Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
>
>
> --
> Rory O'Farrell <[hidden email]>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Rory O'Farrell
On Fri, 9 Feb 2018 07:48:24 -0500
Jim Jagielski <[hidden email]> wrote:

> Can you try the versions from:
>
>     o http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/ <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/>
>
> Thx!

I am actually using the 64 bit deb version 1823225

Rory


>
> > On Feb 9, 2018, at 4:24 AM, Rory O'Farrell <[hidden email]> wrote:
> >
> > When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
> >
> > Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
> >
> >
> > --
> > Rory O'Farrell <[hidden email]>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [hidden email]
> > For additional commands, e-mail: [hidden email]
> >
>


--
Rory O'Farrell <[hidden email]>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Jim Jagielski
Oh. Ugg. The hope was that these builds would address
that specific bug.

Just re-looked at the bug :/

> On Feb 9, 2018, at 8:00 AM, Rory O'Farrell <[hidden email]> wrote:
>
> On Fri, 9 Feb 2018 07:48:24 -0500
> Jim Jagielski <[hidden email] <mailto:[hidden email]>> wrote:
>
>> Can you try the versions from:
>>
>>    o http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/ <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/> <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/ <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/>>
>>
>> Thx!
>
> I am actually using the 64 bit deb version 1823225
>
> Rory
>
>
>>
>>> On Feb 9, 2018, at 4:24 AM, Rory O'Farrell <[hidden email]> wrote:
>>>
>>> When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
>>>
>>> Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
>>>
>>>
>>> --
>>> Rory O'Farrell <[hidden email]>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>>
>
>
> --
> Rory O'Farrell <[hidden email] <mailto:[hidden email]>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email] <mailto:[hidden email]>
> For additional commands, e-mail: [hidden email] <mailto:[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Matthias Seidel
In reply to this post by Jim Jagielski
Am 09.02.2018 um 13:48 schrieb Jim Jagielski:
> Can you try the versions from:
>
>     o http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/ <http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/>

I have still the same problem with this build.

Matthias

>
> Thx!
>
>> On Feb 9, 2018, at 4:24 AM, Rory O'Farrell <[hidden email]> wrote:
>>
>> When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error".  The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic.  Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error".  However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
>>
>> Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
>>
>>
>> --
>> Rory O'Farrell <[hidden email]>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Pedro Lino-3
I'm not sure if this is related but the last version that updates correctly from 4.1.5 is r1816311 from Jim's archive

All newer versions return

dpkg: error processing archive openoffice-core01_4.2.0-1_amd64.deb (--install):
trying to overwrite '/opt/openoffice4/program/gconfbe1.uno.so', which is also in package openoffice-gnome-integration 4.1.5-1

Errors were encountered while processing:
openoffice-core01_4.2.0-1_amd64.deb

Hope this helps.

> On February 11, 2018 at 4:28 PM Matthias Seidel wrote:
>
>
>     Am 09.02.2018 um 13:48 schrieb Jim Jagielski:
>
>         > > Can you try the versions from:
> >
> >         o http://people.apache.org/~jim/AOO-builds/AOO-4.2.0-dev-r1823225/
> >
> >     >     I have still the same problem with this build.
>
>     Matthias
>
>     >
>
>         > > Thx!
> >
> >             > > > On Feb 9, 2018, at 4:24 AM, Rory O'Farrell wrote:
> > >
> > >             When I use 4.2.0, running on Xubuntu 16.04.03, to open an existing .odt file I get a small popup that informs me of "general error". The file then opens correctly; starting 4.2.0 in a terminal gives no diagnostic. Opening Writer from the start centre there is no such error message; I can generate a test document, but when I save, again I get an error "Error saving the document Tom: General Error". However the file Tom.odt is actually saved (in spite of the error message), and will reopen giving the above "general error" message,
> > >
> > >             Opening an existing simple spreadsheet - a short list of description and amount - I get a Yellow exclamation mark and "Not all attributes could be read"; on dismissing this, the sheet opens correctly.
> > >
> > >
> > >             --
> > >             Rory O'Farrell
> > >
> > >             ---------------------------------------------
> > >             To unsubscribe, e-mail: [hidden email] mailto:[hidden email] .org
> > >             For additional commands, e-mail: [hidden email] mailto:[hidden email] .org
> > >
> > >         > >
> >     >
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Andrea Pescetti-2
On 11/02/2018 Pedro Lino wrote:
> dpkg: error processing archive openoffice-core01_4.2.0-1_amd64.deb (--install):
> trying to overwrite '/opt/openoffice4/program/gconfbe1.uno.so', which is also in package openoffice-gnome-integration 4.1.5-1
> Errors were encountered while processing:
> openoffice-core01_4.2.0-1_amd64.deb

What command line are you using? Are you installing all packages
altogether? I mean, I would expect that all files in /opt/openoffice4/
are overwritten by files from the newer packages, and this is just
normal; but in your case it looks like there is a mismatch between the
old "owner" of that file (package openoffice-gnome-integration) and the
new candidate owner (openoffice-core01).

Assuming you are upgrading multiple deb packages with the same
command-line, what happens if you add openoffice-gnome-integration (from
the proper directory) to it?

Regards,
   Andrea.

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Pedro Lino-3
> What command line are you using? Are you installing all packages
> altogether? I mean, I would expect that all files in /opt/openoffice4/
> are overwritten by files from the newer packages, and this is just
> normal; but in your case it looks like there is a mismatch between the
> old "owner" of that file (package openoffice-gnome-integration) and the
> new candidate owner (openoffice-core01).

I use
sudo dpkg -i *.deb
cd desktop-integration
sudo dpkg -i *.deb
 
> Assuming you are upgrading multiple deb packages with the same
> command-line, what happens if you add openoffice-gnome-integration (from
> the proper directory) to it?

It works without errors but then I can't execute any of the AOO links in the Gnome Applications/Office menu

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Mechtilde Stehmann-2
In reply to this post by Andrea Pescetti-2
Hello,

this message commes also when you install via dpkg -i.

If you install openoffice-core01*.deb again, it works.

As dpkg as apt use the same internal database whera all installed files
are saved.

Every time a file comes in anothere package now this message appears.

Regards

Mechtilde

Am 11.02.2018 um 23:05 schrieb Andrea Pescetti:

> On 11/02/2018 Pedro Lino wrote:
>> dpkg: error processing archive openoffice-core01_4.2.0-1_amd64.deb
>> (--install):
>> trying to overwrite '/opt/openoffice4/program/gconfbe1.uno.so', which
>> is also in package openoffice-gnome-integration 4.1.5-1
>> Errors were encountered while processing:
>> openoffice-core01_4.2.0-1_amd64.deb
>
> What command line are you using? Are you installing all packages
> altogether? I mean, I would expect that all files in /opt/openoffice4/
> are overwritten by files from the newer packages, and this is just
> normal; but in your case it looks like there is a mismatch between the
> old "owner" of that file (package openoffice-gnome-integration) and the
> new candidate owner (openoffice-core01).
>
> Assuming you are upgrading multiple deb packages with the same
> command-line, what happens if you add openoffice-gnome-integration (from
> the proper directory) to it?
>
> Regards,
>   Andrea.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
--
Mechtilde Stehmann
## Apache OpenOffice
## Freie Office Suite für Linux, MacOSX, Windows
## Debian Developer
## Loook, calender-exchange-provider, libreoffice-canzeley-client
## PGP encryption welcome
## F0E3 7F3D C87A 4998 2899  39E7 F287 7BBA 141A AD7F


signature.asc (849 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Pedro Lino-3
Bump!


Just installed AOO420m1(Build:9800) - Rev. 1830998
2018-05-05_20:25:59 - Rev. 1831002

on Ubuntu 14.04 and the installation problem still occurs.


Should I open an entry in the tracker?


> On February 11, 2018 at 11:01 PM Mechtilde <[hidden email] mailto:[hidden email] > wrote:
>
>
>     Hello,
>
>     this message commes also when you install via dpkg -i.
>
>     If you install openoffice-core01*.deb again, it works.
>
>     As dpkg as apt use the same internal database whera all installed files
>     are saved.
>
>     Every time a file comes in anothere package now this message appears.
>
>     Regards
>
>     Mechtilde
>
>     Am 11.02.2018 um 23:05 schrieb Andrea Pescetti:
>
>         > > On 11/02/2018 Pedro Lino wrote:
> >
> >             > > > dpkg: error processing archive openoffice-core01_4.2.0-1_amd64.deb
> > >             (--install):
> > >             trying to overwrite '/opt/openoffice4/program/gconfbe1.uno.so', which
> > >             is also in package openoffice-gnome-integration 4.1.5-1
> > >             Errors were encountered while processing:
> > >             openoffice-core01_4.2.0-1_amd64.deb
> > >
> > >         > > What command line are you using? Are you installing all packages
> >         altogether? I mean, I would expect that all files in /opt/openoffice4/
> >         are overwritten by files from the newer packages, and this is just
> >         normal; but in your case it looks like there is a mismatch between the
> >         old "owner" of that file (package openoffice-gnome-integration) and the
> >         new candidate owner (openoffice-core01).
> >
> >         Assuming you are upgrading multiple deb packages with the same
> >         command-line, what happens if you add openoffice-gnome-integration (from
> >         the proper directory) to it?
> >
> >         Regards,
> >           Andrea.
> >
> >         ---------------------------------------------------------------------
> >         To unsubscribe, e-mail: [hidden email] mailto:[hidden email] .org
> >         For additional commands, e-mail: [hidden email] mailto:[hidden email] .org
> >
> >     >     --
>     Mechtilde Stehmann
>     ## Apache OpenOffice
>     ## Freie Office Suite für Linux, MacOSX, Windows
>     ## Debian Developer
>     ## Loook, calender-exchange-provider, libreoffice-canzeley-client
>     ## PGP encryption welcome
>     ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Matthias Seidel
Am 06.05.2018 um 20:04 schrieb Pedro Lino:

> Bump!
>
>
> Just installed AOO420m1(Build:9800) - Rev. 1830998
> 2018-05-05_20:25:59 - Rev. 1831002
>
> on Ubuntu 14.04 and the installation problem still occurs.
>
>
> Should I open an entry in the tracker?
Yes, please.

This happens when updating from 4.1.5 to 4.2.0?

Regards,
   Matthias

>
>
>> On February 11, 2018 at 11:01 PM Mechtilde <[hidden email] mailto:[hidden email] > wrote:
>>
>>
>>     Hello,
>>
>>     this message commes also when you install via dpkg -i.
>>
>>     If you install openoffice-core01*.deb again, it works.
>>
>>     As dpkg as apt use the same internal database whera all installed files
>>     are saved.
>>
>>     Every time a file comes in anothere package now this message appears.
>>
>>     Regards
>>
>>     Mechtilde
>>
>>     Am 11.02.2018 um 23:05 schrieb Andrea Pescetti:
>>
>>         > > On 11/02/2018 Pedro Lino wrote:
>>>             > > > dpkg: error processing archive openoffice-core01_4.2.0-1_amd64.deb
>>>>             (--install):
>>>>             trying to overwrite '/opt/openoffice4/program/gconfbe1.uno.so', which
>>>>             is also in package openoffice-gnome-integration 4.1.5-1
>>>>             Errors were encountered while processing:
>>>>             openoffice-core01_4.2.0-1_amd64.deb
>>>>
>>>>         > > What command line are you using? Are you installing all packages
>>>         altogether? I mean, I would expect that all files in /opt/openoffice4/
>>>         are overwritten by files from the newer packages, and this is just
>>>         normal; but in your case it looks like there is a mismatch between the
>>>         old "owner" of that file (package openoffice-gnome-integration) and the
>>>         new candidate owner (openoffice-core01).
>>>
>>>         Assuming you are upgrading multiple deb packages with the same
>>>         command-line, what happens if you add openoffice-gnome-integration (from
>>>         the proper directory) to it?
>>>
>>>         Regards,
>>>           Andrea.
>>>
>>>         ---------------------------------------------------------------------
>>>         To unsubscribe, e-mail: [hidden email] mailto:[hidden email] .org
>>>         For additional commands, e-mail: [hidden email] mailto:[hidden email] .org
>>>
>>>     >     --
>>     Mechtilde Stehmann
>>     ## Apache OpenOffice
>>     ## Freie Office Suite für Linux, MacOSX, Windows
>>     ## Debian Developer
>>     ## Loook, calender-exchange-provider, libreoffice-canzeley-client
>>     ## PGP encryption welcome
>>     ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Pedro Lino-3

> On May 7, 2018 at 5:57 PM Matthias Seidel <[hidden email] mailto:[hidden email] > wrote:
>
>
>     Am 06.05.2018 um 20:04 schrieb Pedro Lino:
>
>         > > Should I open an entry in the tracker?
> >
> >     >     Yes, please.
>
>     This happens when updating from 4.1.5 to 4.2.0?
>


Done.

https://bz.apache.org/ooo/show_bug.cgi?id=127774

and Yes :)


Interestingly the Rev numbers in the last version I testes are different in the 2 lines copied from the same About dialog :)

AOO420m1(Build:9800) - Rev. 1830998
2018-05-05_20:25:59 - Rev. 1831002


But this is from the Buildbot, so no worries :)
Reply | Threaded
Open this post in threaded view
|

Re: 4.2.0 minor errors

Matthias Seidel
Hi Pedro,

Am 07.05.2018 um 23:13 schrieb Pedro Lino:
> Interestingly the Rev numbers in the last version I testes are different in the 2 lines copied from the same About dialog :)
>
> AOO420m1(Build:9800) - Rev. 1830998
> 2018-05-05_20:25:59 - Rev. 1831002

The first Rev. is the last commit to the OpenOffice SVN.
The second Rev. is the highest overall commit to the ASF SVN at the
time, when the build was checked out.

I am not sure why we need the second one, but the buildbots (for Linux)
where configured that way...

Regards,
   Matthias

>
>
> But this is from the Buildbot, so no worries :)
>



smime.p7s (5K) Download Attachment