AOO418-RC2: General Error on opening files on Ubuntu

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
196 messages Options
1234 ... 10
Reply | Threaded
Open this post in threaded view
|

AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Hi all,

With AOO418-RC2 I get "General Error" messages when opening some files
on Ubuntu 16.04 (64-bit).
After dismissing the error message the files open correctly.

One of them is digitally signed and the other is a simple spreadsheet.
You can download them from here:

https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0

Can anyone confirm?

Regards,

   Matthias



smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
One correction:

The spreadsheet shows "Not all attributes could be read" on opening.

Regards,

   Matthias

Am 10.10.20 um 12:26 schrieb Matthias Seidel:

> Hi all,
>
> With AOO418-RC2 I get "General Error" messages when opening some files
> on Ubuntu 16.04 (64-bit).
> After dismissing the error message the files open correctly.
>
> One of them is digitally signed and the other is a simple spreadsheet.
> You can download them from here:
>
> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>
> Can anyone confirm?
>
> Regards,
>
>    Matthias
>
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Pedro Lino-4
Hi Matthias

I can confirm the same error messages: "Not all attributes could be read" when opening any ODS (including your example) and "General Error" when opening any ODT (including your signed example)
I'm running
AOO418m2(Build:9802)  -  Rev. 1732e54a63
2020-10-07 11:49 - Linux x86_64

under Ubuntu 18.04 x64

Regards,
Pedro


> On 10/10/2020 3:30 PM Matthias Seidel <[hidden email]> wrote:
>
>  
> One correction:
>
> The spreadsheet shows "Not all attributes could be read" on opening.
>
> Regards,
>
>    Matthias
>
> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
> > Hi all,
> >
> > With AOO418-RC2 I get "General Error" messages when opening some files
> > on Ubuntu 16.04 (64-bit).
> > After dismissing the error message the files open correctly.
> >
> > One of them is digitally signed and the other is a simple spreadsheet.
> > You can download them from here:
> >
> > https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
> >
> > Can anyone confirm?
> >
> > Regards,
> >
> >    Matthias
> >
> >

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Hagar Delest-2
In reply to this post by Matthias Seidel
Same for me with your files.
I tried with some of my own files, same issue (.ods and .odt). It seems
to apply to many of my files, maybe all of them.
When I try to save as, I get an Error saving the document... But seems
to save anyway. If I open that new file, I still get the general error
message but loads fine. Then it saves OK but still gives the error
message when loaded.
On my xubuntu 20.04 64bit system.
.odg and .odp open file.

Hagar

Le 10/10/2020 à 16:30, Matthias Seidel a écrit :

> One correction:
>
> The spreadsheet shows "Not all attributes could be read" on opening.
>
> Regards,
>
>     Matthias
>
> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>> Hi all,
>>
>> With AOO418-RC2 I get "General Error" messages when opening some files
>> on Ubuntu 16.04 (64-bit).
>> After dismissing the error message the files open correctly.
>>
>> One of them is digitally signed and the other is a simple spreadsheet.
>> You can download them from here:
>>
>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>
>> Can anyone confirm?
>>
>> Regards,
>>
>>     Matthias
>>
>>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Hi Hagar (and Pedro),

Thanks for testing!

Looks like:

https://bz.apache.org/ooo/show_bug.cgi?id=127315

has come up again, now on 4.1.x

Regards,

   Matthias

Am 10.10.20 um 16:50 schrieb Hagar Delest:

> Same for me with your files.
> I tried with some of my own files, same issue (.ods and .odt). It
> seems to apply to many of my files, maybe all of them.
> When I try to save as, I get an Error saving the document... But seems
> to save anyway. If I open that new file, I still get the general error
> message but loads fine. Then it saves OK but still gives the error
> message when loaded.
> On my xubuntu 20.04 64bit system.
> .odg and .odp open file.
>
> Hagar
>
> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>> One correction:
>>
>> The spreadsheet shows "Not all attributes could be read" on opening.
>>
>> Regards,
>>
>>     Matthias
>>
>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>> Hi all,
>>>
>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>> on Ubuntu 16.04 (64-bit).
>>> After dismissing the error message the files open correctly.
>>>
>>> One of them is digitally signed and the other is a simple spreadsheet.
>>> You can download them from here:
>>>
>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>
>>>
>>> Can anyone confirm?
>>>
>>> Regards,
>>>
>>>     Matthias
>>>
>>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
My initial guess is that you are right... will look a bit deeper

> On Oct 10, 2020, at 10:57 AM, Matthias Seidel <[hidden email]> wrote:
>
> Hi Hagar (and Pedro),
>
> Thanks for testing!
>
> Looks like:
>
> https://bz.apache.org/ooo/show_bug.cgi?id=127315
>
> has come up again, now on 4.1.x
>
> Regards,
>
>    Matthias
>
> Am 10.10.20 um 16:50 schrieb Hagar Delest:
>> Same for me with your files.
>> I tried with some of my own files, same issue (.ods and .odt). It
>> seems to apply to many of my files, maybe all of them.
>> When I try to save as, I get an Error saving the document... But seems
>> to save anyway. If I open that new file, I still get the general error
>> message but loads fine. Then it saves OK but still gives the error
>> message when loaded.
>> On my xubuntu 20.04 64bit system.
>> .odg and .odp open file.
>>
>> Hagar
>>
>> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>>> One correction:
>>>
>>> The spreadsheet shows "Not all attributes could be read" on opening.
>>>
>>> Regards,
>>>
>>>     Matthias
>>>
>>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>>> Hi all,
>>>>
>>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>>> on Ubuntu 16.04 (64-bit).
>>>> After dismissing the error message the files open correctly.
>>>>
>>>> One of them is digitally signed and the other is a simple spreadsheet.
>>>> You can download them from here:
>>>>
>>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>>
>>>>
>>>> Can anyone confirm?
>>>>
>>>> Regards,
>>>>
>>>>     Matthias
>>>>
>>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Hi Jim,

Since the issue was closed because it "suddenly" disappeared it could
have been a change in the build system?

Am 10.10.20 um 19:09 schrieb Jim Jagielski:

> My initial guess is that you are right... will look a bit deeper
>
>> On Oct 10, 2020, at 10:57 AM, Matthias Seidel <[hidden email]> wrote:
>>
>> Hi Hagar (and Pedro),
>>
>> Thanks for testing!
>>
>> Looks like:
>>
>> https://bz.apache.org/ooo/show_bug.cgi?id=127315
>>
>> has come up again, now on 4.1.x
>>
>> Regards,
>>
>>    Matthias
>>
>> Am 10.10.20 um 16:50 schrieb Hagar Delest:
>>> Same for me with your files.
>>> I tried with some of my own files, same issue (.ods and .odt). It
>>> seems to apply to many of my files, maybe all of them.
>>> When I try to save as, I get an Error saving the document... But seems
>>> to save anyway. If I open that new file, I still get the general error
>>> message but loads fine. Then it saves OK but still gives the error
>>> message when loaded.
>>> On my xubuntu 20.04 64bit system.
>>> .odg and .odp open file.
>>>
>>> Hagar
>>>
>>> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>>>> One correction:
>>>>
>>>> The spreadsheet shows "Not all attributes could be read" on opening.
>>>>
>>>> Regards,
>>>>
>>>>     Matthias
>>>>
>>>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>>>> Hi all,
>>>>>
>>>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>>>> on Ubuntu 16.04 (64-bit).
>>>>> After dismissing the error message the files open correctly.
>>>>>
>>>>> One of them is digitally signed and the other is a simple spreadsheet.
>>>>> You can download them from here:
>>>>>
>>>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>>>
>>>>>
>>>>> Can anyone confirm?
>>>>>
>>>>> Regards,
>>>>>
>>>>>     Matthias
>>>>>
>>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
There's been no change in the AOO4.1.x build system for Linux.

> On Oct 11, 2020, at 9:19 AM, Matthias Seidel <[hidden email]> wrote:
>
> Hi Jim,
>
> Since the issue was closed because it "suddenly" disappeared it could
> have been a change in the build system?
>
> Am 10.10.20 um 19:09 schrieb Jim Jagielski:
>> My initial guess is that you are right... will look a bit deeper
>>
>>> On Oct 10, 2020, at 10:57 AM, Matthias Seidel <[hidden email]> wrote:
>>>
>>> Hi Hagar (and Pedro),
>>>
>>> Thanks for testing!
>>>
>>> Looks like:
>>>
>>> https://bz.apache.org/ooo/show_bug.cgi?id=127315
>>>
>>> has come up again, now on 4.1.x
>>>
>>> Regards,
>>>
>>>   Matthias
>>>
>>> Am 10.10.20 um 16:50 schrieb Hagar Delest:
>>>> Same for me with your files.
>>>> I tried with some of my own files, same issue (.ods and .odt). It
>>>> seems to apply to many of my files, maybe all of them.
>>>> When I try to save as, I get an Error saving the document... But seems
>>>> to save anyway. If I open that new file, I still get the general error
>>>> message but loads fine. Then it saves OK but still gives the error
>>>> message when loaded.
>>>> On my xubuntu 20.04 64bit system.
>>>> .odg and .odp open file.
>>>>
>>>> Hagar
>>>>
>>>> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>>>>> One correction:
>>>>>
>>>>> The spreadsheet shows "Not all attributes could be read" on opening.
>>>>>
>>>>> Regards,
>>>>>
>>>>>    Matthias
>>>>>
>>>>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>>>>> Hi all,
>>>>>>
>>>>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>>>>> on Ubuntu 16.04 (64-bit).
>>>>>> After dismissing the error message the files open correctly.
>>>>>>
>>>>>> One of them is digitally signed and the other is a simple spreadsheet.
>>>>>> You can download them from here:
>>>>>>
>>>>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>>>>
>>>>>>
>>>>>> Can anyone confirm?
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>>    Matthias
>>>>>>
>>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [hidden email]
>>>> For additional commands, e-mail: [hidden email]
>>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Andrea Pescetti-2
I get the same on a (64-bit of course) Ubuntu 20.04 system that, for the
record, had OpenOffice 4.1.7 installed.

If I install Jim's RC2 binary from

https://dist.apache.org/repos/dist/dev/openoffice/4.1.8-RC2/binaries/it/Apache_OpenOffice_4.1.8_Linux_x86-64_install-deb_it.tar.gz

and then install it

$ sudo apt install ./*.deb

and I open an old ODT file with File - Open, I get "General error" even
though the file opens just fine after I dismiss the dialog.

If I install my build of the very same code from

https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/Apache_OpenOffice_4.1.8_Linux_x86-64_install-deb_it.tar.gz

and then install it

$ sudo apt install ./*.deb

everything just works as usual.

If anyone wants to try with an English build, you'll find it at
https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/
and I can provide further languages on request, even though this doesn't
seem to depend on languages.

Probably something went wrong with the build environment? I built on a
fresh CentOS 7 system so I can share any details if helpful.

My builds have "Rev." set to "abcde12345" in the About dialog, so you
can identify which ones you are running based on this detail.

Regards,
   Andrea.

Il 11/10/2020 15:29, Jim Jagielski ha scritto:

> There's been no change in the AOO4.1.x build system for Linux.
>
>> On Oct 11, 2020, at 9:19 AM, Matthias Seidel <[hidden email]> wrote:
>>
>> Hi Jim,
>>
>> Since the issue was closed because it "suddenly" disappeared it could
>> have been a change in the build system?
>>
>> Am 10.10.20 um 19:09 schrieb Jim Jagielski:
>>> My initial guess is that you are right... will look a bit deeper
>>>
>>>> On Oct 10, 2020, at 10:57 AM, Matthias Seidel <[hidden email]> wrote:
>>>>
>>>> Hi Hagar (and Pedro),
>>>>
>>>> Thanks for testing!
>>>>
>>>> Looks like:
>>>>
>>>> https://bz.apache.org/ooo/show_bug.cgi?id=127315
>>>>
>>>> has come up again, now on 4.1.x
>>>>
>>>> Regards,
>>>>
>>>>    Matthias
>>>>
>>>> Am 10.10.20 um 16:50 schrieb Hagar Delest:
>>>>> Same for me with your files.
>>>>> I tried with some of my own files, same issue (.ods and .odt). It
>>>>> seems to apply to many of my files, maybe all of them.
>>>>> When I try to save as, I get an Error saving the document... But seems
>>>>> to save anyway. If I open that new file, I still get the general error
>>>>> message but loads fine. Then it saves OK but still gives the error
>>>>> message when loaded.
>>>>> On my xubuntu 20.04 64bit system.
>>>>> .odg and .odp open file.
>>>>>
>>>>> Hagar
>>>>>
>>>>> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>>>>>> One correction:
>>>>>>
>>>>>> The spreadsheet shows "Not all attributes could be read" on opening.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>>     Matthias
>>>>>>
>>>>>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>>>>>> on Ubuntu 16.04 (64-bit).
>>>>>>> After dismissing the error message the files open correctly.
>>>>>>>
>>>>>>> One of them is digitally signed and the other is a simple spreadsheet.
>>>>>>> You can download them from here:
>>>>>>>
>>>>>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>>>>>
>>>>>>>
>>>>>>> Can anyone confirm?
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>     Matthias
>>>>>>>
>>>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: [hidden email]
>>>>> For additional commands, e-mail: [hidden email]
>>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Pedro Lino-4
Hi Andrea, all

> On 10/11/2020 8:57 PM Andrea Pescetti <[hidden email]> wrote:

> If anyone wants to try with an English build, you'll find it at
> https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/
> and I can provide further languages on request, even though this doesn't
> seem to depend on languages.

I can confirm that Andrea's English RC2 works as expected, no Error messages when opening ODT and ODS under Ubuntu 18.04 x64

Regards,
Pedro

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
In reply to this post by Andrea Pescetti-2
Can you provide a copy of the config.log file?

> On Oct 11, 2020, at 3:57 PM, Andrea Pescetti <[hidden email]> wrote:
>
> I get the same on a (64-bit of course) Ubuntu 20.04 system that, for the record, had OpenOffice 4.1.7 installed.
>
> If I install Jim's RC2 binary from
>
> https://dist.apache.org/repos/dist/dev/openoffice/4.1.8-RC2/binaries/it/Apache_OpenOffice_4.1.8_Linux_x86-64_install-deb_it.tar.gz
>
> and then install it
>
> $ sudo apt install ./*.deb
>
> and I open an old ODT file with File - Open, I get "General error" even though the file opens just fine after I dismiss the dialog.
>
> If I install my build of the very same code from
>
> https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/Apache_OpenOffice_4.1.8_Linux_x86-64_install-deb_it.tar.gz
>
> and then install it
>
> $ sudo apt install ./*.deb
>
> everything just works as usual.
>
> If anyone wants to try with an English build, you'll find it at
> https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/
> and I can provide further languages on request, even though this doesn't seem to depend on languages.
>
> Probably something went wrong with the build environment? I built on a fresh CentOS 7 system so I can share any details if helpful.
>
> My builds have "Rev." set to "abcde12345" in the About dialog, so you can identify which ones you are running based on this detail.
>
> Regards,
>  Andrea.
>
> Il 11/10/2020 15:29, Jim Jagielski ha scritto:
>> There's been no change in the AOO4.1.x build system for Linux.
>>> On Oct 11, 2020, at 9:19 AM, Matthias Seidel <[hidden email]> wrote:
>>>
>>> Hi Jim,
>>>
>>> Since the issue was closed because it "suddenly" disappeared it could
>>> have been a change in the build system?
>>>
>>> Am 10.10.20 um 19:09 schrieb Jim Jagielski:
>>>> My initial guess is that you are right... will look a bit deeper
>>>>
>>>>> On Oct 10, 2020, at 10:57 AM, Matthias Seidel <[hidden email]> wrote:
>>>>>
>>>>> Hi Hagar (and Pedro),
>>>>>
>>>>> Thanks for testing!
>>>>>
>>>>> Looks like:
>>>>>
>>>>> https://bz.apache.org/ooo/show_bug.cgi?id=127315
>>>>>
>>>>> has come up again, now on 4.1.x
>>>>>
>>>>> Regards,
>>>>>
>>>>>   Matthias
>>>>>
>>>>> Am 10.10.20 um 16:50 schrieb Hagar Delest:
>>>>>> Same for me with your files.
>>>>>> I tried with some of my own files, same issue (.ods and .odt). It
>>>>>> seems to apply to many of my files, maybe all of them.
>>>>>> When I try to save as, I get an Error saving the document... But seems
>>>>>> to save anyway. If I open that new file, I still get the general error
>>>>>> message but loads fine. Then it saves OK but still gives the error
>>>>>> message when loaded.
>>>>>> On my xubuntu 20.04 64bit system.
>>>>>> .odg and .odp open file.
>>>>>>
>>>>>> Hagar
>>>>>>
>>>>>> Le 10/10/2020 à 16:30, Matthias Seidel a écrit :
>>>>>>> One correction:
>>>>>>>
>>>>>>> The spreadsheet shows "Not all attributes could be read" on opening.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>    Matthias
>>>>>>>
>>>>>>> Am 10.10.20 um 12:26 schrieb Matthias Seidel:
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> With AOO418-RC2 I get "General Error" messages when opening some files
>>>>>>>> on Ubuntu 16.04 (64-bit).
>>>>>>>> After dismissing the error message the files open correctly.
>>>>>>>>
>>>>>>>> One of them is digitally signed and the other is a simple spreadsheet.
>>>>>>>> You can download them from here:
>>>>>>>>
>>>>>>>> https://www.dropbox.com/sh/vnvlqyw25hh9v85/AABCWjCaTpGIvB9H074hraB7a?dl=0
>>>>>>>>
>>>>>>>>
>>>>>>>> Can anyone confirm?
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>>    Matthias
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: [hidden email]
>>>>>> For additional commands, e-mail: [hidden email]
>>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [hidden email]
>>>> For additional commands, e-mail: [hidden email]
>>>>
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Andrea Pescetti-2
Jim Jagielski wrote:
> Can you provide a copy of the config.log file?

Sure, uploaded at
http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/

Just a remark about those builds: those are not release builds, I just
build with flags that are good for me in general. All details in the log
file.

Regards,
   Andrea.

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
Diffs which seem important (mine are the '-'):

-ENABLE_CRASHDUMP='TRUE'
+ENABLE_CRASHDUMP=''

-ENABLE_DBUS='TRUE'
+ENABLE_DBUS=''

-SYSTEM_SERVLETAPI='NO'
+SYSTEM_SERVLETAPI=''

-SYSTEM_STDLIBS='YES'
+SYSTEM_STDLIBS='NO'

-ENABLE_GSTREAMER='TRUE'
+ENABLE_GSTREAMER=''

-ENABLE_MEDIAWIKI='YES'
+ENABLE_MEDIAWIKI='NO'

-ENABLE_OPENGL='TRUE'
+ENABLE_OPENGL=''

-JAVAFLAGS=''
+JAVAFLAGS='-source 1.5 -target 1.5'


Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit

> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>
> Jim Jagielski wrote:
>> Can you provide a copy of the config.log file?
>
> Sure, uploaded at
> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>
> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>
> Regards,
>  Andrea.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Hi Jim,

Do you see a chance that this can be corrected by build options?

Or do we need RC3?

Regards,

   Matthias

Am 12.10.20 um 22:05 schrieb Jim Jagielski:

> Diffs which seem important (mine are the '-'):
>
> -ENABLE_CRASHDUMP='TRUE'
> +ENABLE_CRASHDUMP=''
>
> -ENABLE_DBUS='TRUE'
> +ENABLE_DBUS=''
>
> -SYSTEM_SERVLETAPI='NO'
> +SYSTEM_SERVLETAPI=''
>
> -SYSTEM_STDLIBS='YES'
> +SYSTEM_STDLIBS='NO'
>
> -ENABLE_GSTREAMER='TRUE'
> +ENABLE_GSTREAMER=''
>
> -ENABLE_MEDIAWIKI='YES'
> +ENABLE_MEDIAWIKI='NO'
>
> -ENABLE_OPENGL='TRUE'
> +ENABLE_OPENGL=''
>
> -JAVAFLAGS=''
> +JAVAFLAGS='-source 1.5 -target 1.5'
>
>
> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>
>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>
>> Jim Jagielski wrote:
>>> Can you provide a copy of the config.log file?
>> Sure, uploaded at
>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>
>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>
>> Regards,
>>  Andrea.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Peter Kovacs-3
ENABLE_CRASHDUMP defaults to NO

IMHO ENABLE_DBUS switch is ignored

SYSTEM_SERVLETAPI defaults to NO
ENABLE_GSTREAMER defaults to NO

ENABLE_OPENGL looks like the code tests for GL libs. And tzhe switch is overwritten / ignored.

The switch SYSTEM_STDLIBS will decide if the systemlib used is packaged
into the delivery or not.

For me this option is most likely to cause Issues.

What do you think? I am not sure which state does add the stdlib to the
binary.

3698 dnl ===================================================================
3699 dnl Check for system stdlibs
3700 dnl ===================================================================
3701 AC_MSG_CHECKING([whether to provide libstdc++/libgcc_s in the
installset])
3702 if test -n "$with_system_stdlibs" -o -n "$with_system_libs" && \
3703    test "$with_system_stdlibs" != "no"; then
3704    AC_MSG_RESULT([no])
3705    SYSTEM_STDLIBS=YES
3706 else
3707    AC_MSG_RESULT([yes])
3708    SYSTEM_STDLIBS=NO
3709 fi


Am 13.10.20 um 20:48 schrieb Matthias Seidel:

> Hi Jim,
>
> Do you see a chance that this can be corrected by build options?
>
> Or do we need RC3?
>
> Regards,
>
>     Matthias
>
> Am 12.10.20 um 22:05 schrieb Jim Jagielski:
>> Diffs which seem important (mine are the '-'):
>>
>> -ENABLE_CRASHDUMP='TRUE'
>> +ENABLE_CRASHDUMP=''
>>
>> -ENABLE_DBUS='TRUE'
>> +ENABLE_DBUS=''
>>
>> -SYSTEM_SERVLETAPI='NO'
>> +SYSTEM_SERVLETAPI=''
>>
>> -SYSTEM_STDLIBS='YES'
>> +SYSTEM_STDLIBS='NO'
>>
>> -ENABLE_GSTREAMER='TRUE'
>> +ENABLE_GSTREAMER=''
>>
>> -ENABLE_MEDIAWIKI='YES'
>> +ENABLE_MEDIAWIKI='NO'
>>
>> -ENABLE_OPENGL='TRUE'
>> +ENABLE_OPENGL=''
>>
>> -JAVAFLAGS=''
>> +JAVAFLAGS='-source 1.5 -target 1.5'
>>
>>
>> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>>
>>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>>
>>> Jim Jagielski wrote:
>>>> Can you provide a copy of the config.log file?
>>> Sure, uploaded at
>>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>>
>>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>>
>>> Regards,
>>>   Andrea.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Andrea Pescetti-2
On 13/10/2020 Peter Kovacs wrote:
> The switch SYSTEM_STDLIBS will decide if the systemlib used is packaged
> into the delivery or not.
> For me this option is most likely to cause Issues.

I've rebuilt with options closer to the one Jim posted and I still don't
see the problem with my builds.

New builds and config.log are available at
https://home.apache.org/~pescetti/openoffice-4.1.8-rc2/
in the "pescetti-2" folder and they will identify as "pescetti-2" in the
About dialog, to differentiate from the earlier ones now moved to
"pescetti-1" (and "abcde12345" in the About dialog).

My results:
- Jim's RC2: General error
- pescetti-1 build (About dialog: "abcde12345"): No error
- pescetti-2 build (About dialog: "pescetti-2"): No error

So, even if the file size of the "pescetti-2" builds is much different
from the "pescetti-1" builds, it looks like the config options didn't
influence the outcome.

Regards,
   Andrea.

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
In reply to this post by Matthias Seidel
None of these are different from how we have built the other 4.1.x Linux builds, so I am curious why 4.1.8 breaks but 4.1.7 and older didn't.

> On Oct 13, 2020, at 2:48 PM, Matthias Seidel <[hidden email]> wrote:
>
> Hi Jim,
>
> Do you see a chance that this can be corrected by build options?
>
> Or do we need RC3?
>
> Regards,
>
>    Matthias
>
> Am 12.10.20 um 22:05 schrieb Jim Jagielski:
>> Diffs which seem important (mine are the '-'):
>>
>> -ENABLE_CRASHDUMP='TRUE'
>> +ENABLE_CRASHDUMP=''
>>
>> -ENABLE_DBUS='TRUE'
>> +ENABLE_DBUS=''
>>
>> -SYSTEM_SERVLETAPI='NO'
>> +SYSTEM_SERVLETAPI=''
>>
>> -SYSTEM_STDLIBS='YES'
>> +SYSTEM_STDLIBS='NO'
>>
>> -ENABLE_GSTREAMER='TRUE'
>> +ENABLE_GSTREAMER=''
>>
>> -ENABLE_MEDIAWIKI='YES'
>> +ENABLE_MEDIAWIKI='NO'
>>
>> -ENABLE_OPENGL='TRUE'
>> +ENABLE_OPENGL=''
>>
>> -JAVAFLAGS=''
>> +JAVAFLAGS='-source 1.5 -target 1.5'
>>
>>
>> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>>
>>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>>
>>> Jim Jagielski wrote:
>>>> Can you provide a copy of the config.log file?
>>> Sure, uploaded at
>>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>>
>>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>>
>>> Regards,
>>> Andrea.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Am 14.10.20 um 18:48 schrieb Jim Jagielski:
> None of these are different from how we have built the other 4.1.x Linux builds, so I am curious why 4.1.8 breaks but 4.1.7 and older didn't.

We did a *lot* of backporting... And the same problem occurred in trunk
some time ago.

>
>> On Oct 13, 2020, at 2:48 PM, Matthias Seidel <[hidden email]> wrote:
>>
>> Hi Jim,
>>
>> Do you see a chance that this can be corrected by build options?
>>
>> Or do we need RC3?
>>
>> Regards,
>>
>>    Matthias
>>
>> Am 12.10.20 um 22:05 schrieb Jim Jagielski:
>>> Diffs which seem important (mine are the '-'):
>>>
>>> -ENABLE_CRASHDUMP='TRUE'
>>> +ENABLE_CRASHDUMP=''
>>>
>>> -ENABLE_DBUS='TRUE'
>>> +ENABLE_DBUS=''
>>>
>>> -SYSTEM_SERVLETAPI='NO'
>>> +SYSTEM_SERVLETAPI=''
>>>
>>> -SYSTEM_STDLIBS='YES'
>>> +SYSTEM_STDLIBS='NO'
>>>
>>> -ENABLE_GSTREAMER='TRUE'
>>> +ENABLE_GSTREAMER=''
>>>
>>> -ENABLE_MEDIAWIKI='YES'
>>> +ENABLE_MEDIAWIKI='NO'
>>>
>>> -ENABLE_OPENGL='TRUE'
>>> +ENABLE_OPENGL=''
>>>
>>> -JAVAFLAGS=''
>>> +JAVAFLAGS='-source 1.5 -target 1.5'
>>>
>>>
>>> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>>>
>>>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>>>
>>>> Jim Jagielski wrote:
>>>>> Can you provide a copy of the config.log file?
>>>> Sure, uploaded at
>>>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>>>
>>>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>>>
>>>> Regards,
>>>> Andrea.
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [hidden email]
>>>> For additional commands, e-mail: [hidden email]
>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Jim Jagielski
I agree... my point is that I don't think the build settings alone are the issue... We are obviously missing either a backport or one of the backports have required some change to the build settings.

FTR: the configure settings for 4.2.0 and 4.1.8 on Linux32/64 are the same... so if it IS something about a backport breaking a configure/build setting, it's not there in 4.2.x/trunk


> On Oct 14, 2020, at 1:06 PM, Matthias Seidel <[hidden email]> wrote:
>
> Am 14.10.20 um 18:48 schrieb Jim Jagielski:
>> None of these are different from how we have built the other 4.1.x Linux builds, so I am curious why 4.1.8 breaks but 4.1.7 and older didn't.
>
> We did a *lot* of backporting... And the same problem occurred in trunk
> some time ago.
>
>>
>>> On Oct 13, 2020, at 2:48 PM, Matthias Seidel <[hidden email]> wrote:
>>>
>>> Hi Jim,
>>>
>>> Do you see a chance that this can be corrected by build options?
>>>
>>> Or do we need RC3?
>>>
>>> Regards,
>>>
>>>   Matthias
>>>
>>> Am 12.10.20 um 22:05 schrieb Jim Jagielski:
>>>> Diffs which seem important (mine are the '-'):
>>>>
>>>> -ENABLE_CRASHDUMP='TRUE'
>>>> +ENABLE_CRASHDUMP=''
>>>>
>>>> -ENABLE_DBUS='TRUE'
>>>> +ENABLE_DBUS=''
>>>>
>>>> -SYSTEM_SERVLETAPI='NO'
>>>> +SYSTEM_SERVLETAPI=''
>>>>
>>>> -SYSTEM_STDLIBS='YES'
>>>> +SYSTEM_STDLIBS='NO'
>>>>
>>>> -ENABLE_GSTREAMER='TRUE'
>>>> +ENABLE_GSTREAMER=''
>>>>
>>>> -ENABLE_MEDIAWIKI='YES'
>>>> +ENABLE_MEDIAWIKI='NO'
>>>>
>>>> -ENABLE_OPENGL='TRUE'
>>>> +ENABLE_OPENGL=''
>>>>
>>>> -JAVAFLAGS=''
>>>> +JAVAFLAGS='-source 1.5 -target 1.5'
>>>>
>>>>
>>>> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>>>>
>>>>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>>>>
>>>>> Jim Jagielski wrote:
>>>>>> Can you provide a copy of the config.log file?
>>>>> Sure, uploaded at
>>>>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>>>>
>>>>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>>>>
>>>>> Regards,
>>>>> Andrea.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: [hidden email]
>>>>> For additional commands, e-mail: [hidden email]
>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [hidden email]
>>>> For additional commands, e-mail: [hidden email]
>>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: AOO418-RC2: General Error on opening files on Ubuntu

Matthias Seidel
Am 14.10.20 um 19:15 schrieb Jim Jagielski:
> I agree... my point is that I don't think the build settings alone are the issue... We are obviously missing either a backport or one of the backports have required some change to the build settings.
>
> FTR: the configure settings for 4.2.0 and 4.1.8 on Linux32/64 are the same... so if it IS something about a backport breaking a configure/build setting, it's not there in 4.2.x/trunk

Or a difference between CentOS 5 and CentOS 7.

I am not sure, but is the problem still visible in our buildbot builds
(Ubuntu)?

>
>
>> On Oct 14, 2020, at 1:06 PM, Matthias Seidel <[hidden email]> wrote:
>>
>> Am 14.10.20 um 18:48 schrieb Jim Jagielski:
>>> None of these are different from how we have built the other 4.1.x Linux builds, so I am curious why 4.1.8 breaks but 4.1.7 and older didn't.
>> We did a *lot* of backporting... And the same problem occurred in trunk
>> some time ago.
>>
>>>> On Oct 13, 2020, at 2:48 PM, Matthias Seidel <[hidden email]> wrote:
>>>>
>>>> Hi Jim,
>>>>
>>>> Do you see a chance that this can be corrected by build options?
>>>>
>>>> Or do we need RC3?
>>>>
>>>> Regards,
>>>>
>>>>   Matthias
>>>>
>>>> Am 12.10.20 um 22:05 schrieb Jim Jagielski:
>>>>> Diffs which seem important (mine are the '-'):
>>>>>
>>>>> -ENABLE_CRASHDUMP='TRUE'
>>>>> +ENABLE_CRASHDUMP=''
>>>>>
>>>>> -ENABLE_DBUS='TRUE'
>>>>> +ENABLE_DBUS=''
>>>>>
>>>>> -SYSTEM_SERVLETAPI='NO'
>>>>> +SYSTEM_SERVLETAPI=''
>>>>>
>>>>> -SYSTEM_STDLIBS='YES'
>>>>> +SYSTEM_STDLIBS='NO'
>>>>>
>>>>> -ENABLE_GSTREAMER='TRUE'
>>>>> +ENABLE_GSTREAMER=''
>>>>>
>>>>> -ENABLE_MEDIAWIKI='YES'
>>>>> +ENABLE_MEDIAWIKI='NO'
>>>>>
>>>>> -ENABLE_OPENGL='TRUE'
>>>>> +ENABLE_OPENGL=''
>>>>>
>>>>> -JAVAFLAGS=''
>>>>> +JAVAFLAGS='-source 1.5 -target 1.5'
>>>>>
>>>>>
>>>>> Community builds include: --with-system-stdlibs --enable-crashdump=yes --enable-wiki-publisher --enable-opengl --enable-dbus --enable-gstreamer --without-junit
>>>>>
>>>>>> On Oct 12, 2020, at 1:50 PM, Andrea Pescetti <[hidden email]> wrote:
>>>>>>
>>>>>> Jim Jagielski wrote:
>>>>>>> Can you provide a copy of the config.log file?
>>>>>> Sure, uploaded at
>>>>>> http://people.apache.org/~pescetti/openoffice-4.1.8-rc2/
>>>>>>
>>>>>> Just a remark about those builds: those are not release builds, I just build with flags that are good for me in general. All details in the log file.
>>>>>>
>>>>>> Regards,
>>>>>> Andrea.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: [hidden email]
>>>>>> For additional commands, e-mail: [hidden email]
>>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: [hidden email]
>>>>> For additional commands, e-mail: [hidden email]
>>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
1234 ... 10