Building AOO 4.2.0 and postprocess module

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Building AOO 4.2.0 and postprocess module

Jim Jagielski
I've gotten pretty far in building 4.2.0 but the below error is
a puzzler for me... Any ideas or hints would be appreciated.
It looks like a build dependency, somewhere:


=============
Building module postprocess
=============

Entering /Users/jim/src/asf/code/follow/aoo/main/postprocess/checkxml


Entering /Users/jim/src/asf/code/follow/aoo/main/postprocess/checkdeliver

/opt/local/bin/perl checkxml.pl
/opt/local/bin/perl checkdeliver.pl  -l ../unxmaccx.pro/misc/checkdeliver_log.txt && touch ../unxmaccx.pro/misc/checkdeliver.done
Checking:/Users/jim/src/asf/code/follow/aoo/main/solver/420/unxmaccx.pro/xml/
checkdeliver.pl - checking delivered binaries
OK

Entering /Users/jim/src/asf/code/follow/aoo/main/postprocess/packcomponents

dmake:  Error: -- `/Users/jim/src/asf/code/follow/aoo/main/solver/420/unxmaccx.pro/xml/components/fpicker/source/aqua/fps_aqua.component' not found, and can't be made
ok.

1 module(s):
        postprocess
need(s) to be rebuilt
---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Marcus (OOo)
Am 13.10.2017 um 22:46 schrieb Jim Jagielski:
> I've gotten pretty far in building 4.2.0 but the below error is
> a puzzler for me... Any ideas or hints would be appreciated.
> It looks like a build dependency, somewhere:

as a not so skilled builder, sometimes it helps me to:

- just restart a new build without clean-up
- clean-up only the affected module and then repeat building this module
- clean-up all and finally restart a complete build

HTH

Marcus


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Jim Jagielski
Thx. Yeah, I've tried that but haven't had luck so far.

> On Oct 13, 2017, at 6:02 PM, Marcus <[hidden email]> wrote:
>
> Am 13.10.2017 um 22:46 schrieb Jim Jagielski:
>> I've gotten pretty far in building 4.2.0 but the below error is
>> a puzzler for me... Any ideas or hints would be appreciated.
>> It looks like a build dependency, somewhere:
>
> as a not so skilled builder, sometimes it helps me to:
>
> - just restart a new build without clean-up
> - clean-up only the affected module and then repeat building this module
> - clean-up all and finally restart a complete build
>
> HTH
>
> Marcus
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Andrea Pescetti-2
In reply to this post by Jim Jagielski
On 13/10/2017 Jim Jagielski wrote:
> I've gotten pretty far in building 4.2.0 but the below error is
> a puzzler for me... Any ideas or hints would be appreciated.
> It looks like a build dependency, somewhere

How many parallel jobs do you run?

I usually build "4x4", i.e.
$ build --all -P4 -- -P4
(with the arcane syntax explained in the build guide)
but at times dependencies on trunk are not perfect -at least when I was
building trunk more regularly; in the last months I've always built
AOO414- so I had to fix it by relaunching the build as simply
$ build --all
without purging the tree.

Regards,
   Andrea.

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Jim Jagielski
I found the problem... It looked to be a cut/paste error where the
build system was looking in:

  solver/420/unxmaccx.pro/xml/components

instead of:

   solver/420/unxmaccx.pro/xml/components

It looks like a number of things in 4.2.0 related to
macOS haven't been tested/built yet so I'm running into
them. And fixing them as I hit them.

> On Oct 14, 2017, at 11:04 AM, Andrea Pescetti <[hidden email]> wrote:
>
> On 13/10/2017 Jim Jagielski wrote:
>> I've gotten pretty far in building 4.2.0 but the below error is
>> a puzzler for me... Any ideas or hints would be appreciated.
>> It looks like a build dependency, somewhere
>
> How many parallel jobs do you run?
>
> I usually build "4x4", i.e.
> $ build --all -P4 -- -P4
> (with the arcane syntax explained in the build guide)
> but at times dependencies on trunk are not perfect -at least when I was building trunk more regularly; in the last months I've always built AOO414- so I had to fix it by relaunching the build as simply
> $ build --all
> without purging the tree.
>
> Regards,
>  Andrea.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Jim Jagielski

> On Oct 14, 2017, at 11:28 AM, Jim Jagielski <[hidden email]> wrote:
>
> I found the problem... It looked to be a cut/paste error where the
> build system was looking in:
>
>  solver/420/unxmaccx.pro/xml/components
>
> instead of:
>
>   solver/420/unxmaccx.pro/xml/components
>

Oops. Should be:

   solver/420/unxmaccx.pro/xml/component

(i.e.: no 's' at the end)

> It looks like a number of things in 4.2.0 related to
> macOS haven't been tested/built yet so I'm running into
> them. And fixing them as I hit them.
>
>> On Oct 14, 2017, at 11:04 AM, Andrea Pescetti <[hidden email]> wrote:
>>
>> On 13/10/2017 Jim Jagielski wrote:
>>> I've gotten pretty far in building 4.2.0 but the below error is
>>> a puzzler for me... Any ideas or hints would be appreciated.
>>> It looks like a build dependency, somewhere
>>
>> How many parallel jobs do you run?
>>
>> I usually build "4x4", i.e.
>> $ build --all -P4 -- -P4
>> (with the arcane syntax explained in the build guide)
>> but at times dependencies on trunk are not perfect -at least when I was building trunk more regularly; in the last months I've always built AOO414- so I had to fix it by relaunching the build as simply
>> $ build --all
>> without purging the tree.
>>
>> Regards,
>> Andrea.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Building AOO 4.2.0 and postprocess module

Marcus (OOo)
Am 14.10.2017 um 17:28 schrieb Jim Jagielski:

>> On Oct 14, 2017, at 11:28 AM, Jim Jagielski <[hidden email]> wrote:
>>
>> I found the problem... It looked to be a cut/paste error where the
>> build system was looking in:
>>
>>   solver/420/unxmaccx.pro/xml/components
>>
>> instead of:
>>
>>    solver/420/unxmaccx.pro/xml/components
>
> Oops. Should be:
>
>     solver/420/unxmaccx.pro/xml/component
>
> (i.e.: no 's' at the end)

oh dear, such stupid things are really hard to find. I'm really thankful
that you want to struggle through them. I hope that the remaining ones
are more obvious.

Thanks

Marcus



>> It looks like a number of things in 4.2.0 related to
>> macOS haven't been tested/built yet so I'm running into
>> them. And fixing them as I hit them.
>>
>>> On Oct 14, 2017, at 11:04 AM, Andrea Pescetti <[hidden email]> wrote:
>>>
>>> On 13/10/2017 Jim Jagielski wrote:
>>>> I've gotten pretty far in building 4.2.0 but the below error is
>>>> a puzzler for me... Any ideas or hints would be appreciated.
>>>> It looks like a build dependency, somewhere
>>>
>>> How many parallel jobs do you run?
>>>
>>> I usually build "4x4", i.e.
>>> $ build --all -P4 -- -P4
>>> (with the arcane syntax explained in the build guide)
>>> but at times dependencies on trunk are not perfect -at least when I was building trunk more regularly; in the last months I've always built AOO414- so I had to fix it by relaunching the build as simply
>>> $ build --all
>>> without purging the tree.
>>>
>>> Regards,
>>> Andrea.


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]