Windows build woes

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
18 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Windows build woes

Jim Jagielski
Getting errors when building under Win7:

[ build RES ] apr-util/default
[ build RES ]
R=c:/cygwin/home/jim/src/asf/aoo-414 && O=$R/main/solver/414/wntmsci12 && W=$R/main/solver/414/wntmsci12/workdir && S=$R/main &&  $O/bin/makedepend.exe -I. -IC:/cygwin$O/inc/stl -IC:/cygwin$O/inc/external -IC:/cygwin$O/inc -IC:/cygwin$S/solenv/wntmsci12/inc -IC:/cygwin$S/solenv/inc -IC:/cygwin$S/res -IC:/AOO41X~1/OPENJD~1.0_U/include/win32 -IC:/AOO41X~1/OPENJD~1.0_U/include -IC:/MICROS~1/Windows/v7.0/include -IC:/PROGRA~2/MICROS~1.0/VC/include -IC:/AOO41X~1/dxsdk/include -IC:/AOO41X~1/dxsdk/include  -DWINVER=0x0400 -DWIN32  -DADDITIONAL_VERINFO1 -DADDITIONAL_VERINFO2 -DADDITIONAL_VERINFO3  $W/Dep/WinResTarget/apr-util/default.d -f - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk -v OBJECTFILE=$W/WinResTarget/apr-util/default.res -v OUTDIR=$O/ -v WORKDIR=$W/ -v SRCDIR=$S/ -v REPODIR=$R/ > $W/Dep/WinResTarget/apr-util/default.d
awk: fatal: can't open source file `C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk' for reading (No such file or directory)
make: *** [C:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/WinResTarget.mk:60: /home/jim/src/asf/aoo-414/main/solver/414/wntmsci12/workdir/WinResTarget/apr-util/default.res] Error 2
dmake:  Error code 2, while making './wntmsci12/misc/build/so_built_aprutil'

1 module(s):
        apr-util
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /home/jim/src/asf/aoo-414/ext_libraries/apr-util

When you have fixed the errors in that module you can resume the build by running:

        build --from apr-util

awk is gawk as required... The filename 'C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk'
look wonky as crud.
---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Patricia Shanahan
Regardless of anything else you do, retry the full build, without
cleaning but also without specifying starting from the failure.

Sometimes the windows builds don't seem to get all the dependency
ordering right. If that is the cause of the failure, repeating the build
can resolve it. For example, my last windows build of 4.1.4 took three
tries.


On 8/8/2017 8:16 AM, Jim Jagielski wrote:

> Getting errors when building under Win7:
>
> [ build RES ] apr-util/default
> [ build RES ]
> R=c:/cygwin/home/jim/src/asf/aoo-414 && O=$R/main/solver/414/wntmsci12 && W=$R/main/solver/414/wntmsci12/workdir && S=$R/main &&  $O/bin/makedepend.exe -I. -IC:/cygwin$O/inc/stl -IC:/cygwin$O/inc/external -IC:/cygwin$O/inc -IC:/cygwin$S/solenv/wntmsci12/inc -IC:/cygwin$S/solenv/inc -IC:/cygwin$S/res -IC:/AOO41X~1/OPENJD~1.0_U/include/win32 -IC:/AOO41X~1/OPENJD~1.0_U/include -IC:/MICROS~1/Windows/v7.0/include -IC:/PROGRA~2/MICROS~1.0/VC/include -IC:/AOO41X~1/dxsdk/include -IC:/AOO41X~1/dxsdk/include  -DWINVER=0x0400 -DWIN32  -DADDITIONAL_VERINFO1 -DADDITIONAL_VERINFO2 -DADDITIONAL_VERINFO3  $W/Dep/WinResTarget/apr-util/default.d -f - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk -v OBJECTFILE=$W/WinResTarget/apr-util/default.res -v OUTDIR=$O/ -v WORKDIR=$W/ -v SRCDIR=$S/ -v REPODIR=$R/ > $W/Dep/WinResTarget/apr-util/default.d
> awk: fatal: can't open source file `C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk' for reading (No such file or directory)
> make: *** [C:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/WinResTarget.mk:60: /home/jim/src/asf/aoo-414/main/solver/414/wntmsci12/workdir/WinResTarget/apr-util/default.res] Error 2
> dmake:  Error code 2, while making './wntmsci12/misc/build/so_built_aprutil'
>
> 1 module(s):
>          apr-util
> need(s) to be rebuilt
>
> Reason(s):
>
> ERROR: error 65280 occurred while making /home/jim/src/asf/aoo-414/ext_libraries/apr-util
>
> When you have fixed the errors in that module you can resume the build by running:
>
>          build --from apr-util
>
> awk is gawk as required... The filename 'C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk'
> look wonky as crud.
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Don Lewis-2
I ran into this same error as well when I did an incremental build
starting from expat.  Cleaning and doing a full build worked.

On  8 Aug, Patricia Shanahan wrote:

> Regardless of anything else you do, retry the full build, without
> cleaning but also without specifying starting from the failure.
>
> Sometimes the windows builds don't seem to get all the dependency
> ordering right. If that is the cause of the failure, repeating the build
> can resolve it. For example, my last windows build of 4.1.4 took three
> tries.
>
>
> On 8/8/2017 8:16 AM, Jim Jagielski wrote:
>> Getting errors when building under Win7:
>>
>> [ build RES ] apr-util/default
>> [ build RES ]
>> R=c:/cygwin/home/jim/src/asf/aoo-414 && O=$R/main/solver/414/wntmsci12 && W=$R/main/solver/414/wntmsci12/workdir && S=$R/main &&  $O/bin/makedepend.exe -I. -IC:/cygwin$O/inc/stl -IC:/cygwin$O/inc/external -IC:/cygwin$O/inc -IC:/cygwin$S/solenv/wntmsci12/inc -IC:/cygwin$S/solenv/inc -IC:/cygwin$S/res -IC:/AOO41X~1/OPENJD~1.0_U/include/win32 -IC:/AOO41X~1/OPENJD~1.0_U/include -IC:/MICROS~1/Windows/v7.0/include -IC:/PROGRA~2/MICROS~1.0/VC/include -IC:/AOO41X~1/dxsdk/include -IC:/AOO41X~1/dxsdk/include  -DWINVER=0x0400 -DWIN32  -DADDITIONAL_VERINFO1 -DADDITIONAL_VERINFO2 -DADDITIONAL_VERINFO3  $W/Dep/WinResTarget/apr-util/default.d -f - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk -v OBJECTFILE=$W/WinResTarget/apr-util/default.res -v OUTDIR=$O/ -v WORKDIR=$W/ -v SRCDIR=$S/ -v REPODIR=$R/ > $W/Dep/WinResTarget/apr-util/default.d
>> awk: fatal: can't open source file `C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk' for reading (No such file or directory)
>> make: *** [C:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/WinResTarget.mk:60: /home/jim/src/asf/aoo-414/main/solver/414/wntmsci12/workdir/WinResTarget/apr-util/default.res] Error 2
>> dmake:  Error code 2, while making './wntmsci12/misc/build/so_built_aprutil'
>>
>> 1 module(s):
>>          apr-util
>> need(s) to be rebuilt
>>
>> Reason(s):
>>
>> ERROR: error 65280 occurred while making /home/jim/src/asf/aoo-414/ext_libraries/apr-util
>>
>> When you have fixed the errors in that module you can resume the build by running:
>>
>>          build --from apr-util
>>
>> awk is gawk as required... The filename 'C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main/solenv/gbuild/processdeps.awk'
>> look wonky as crud.
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
It looks like some sort of variable interpolation issue... Note
that it's trying to do:

    - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk

Now with:

    S=$R/main
    R=c:/cygwin/home/jim/src/asf/aoo-414

you can see how what comes out is:

    - | awk -f C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main

Now I'm not sure if it's the value of $R which is
wrong or the awk line itself is mangled... nor can I find
where these are defined. Nor can I understand why it's just
affecting me :)


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Don Lewis-2
On  8 Aug, Jim Jagielski wrote:

> It looks like some sort of variable interpolation issue... Note
> that it's trying to do:
>
>     - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk
>
> Now with:
>
>     S=$R/main
>     R=c:/cygwin/home/jim/src/asf/aoo-414
>
> you can see how what comes out is:
>
>     - | awk -f C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main
>
> Now I'm not sure if it's the value of $R which is
> wrong or the awk line itself is mangled... nor can I find
> where these are defined. Nor can I understand why it's just
> affecting me :)

The awk line looks wrong to me.  I *think* it should be awk -f
$S/solenv/gbuild/processdeps.awk.  I'm not sure where this is coming
from, though.  The platform-specific gbuild makefiles contain this:
  $(gb_AWK) -f $(GBUILDDIR)/processdeps.awk
and apr-util sets this:
  GBUILDDIR := $(SOLARENV)/gbuild
What is SOLARENV set to in your environment?

Unfortunately it will be a while before I can spin up my windows VM to
look at this.


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
The only thing I can think of is some sort of env pollution
causing that... starting from a fresh dwnload.

> On Aug 8, 2017, at 12:59 PM, Don Lewis <[hidden email]> wrote:
>
> On  8 Aug, Jim Jagielski wrote:
>> It looks like some sort of variable interpolation issue... Note
>> that it's trying to do:
>>
>>    - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk
>>
>> Now with:
>>
>>    S=$R/main
>>    R=c:/cygwin/home/jim/src/asf/aoo-414
>>
>> you can see how what comes out is:
>>
>>    - | awk -f C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main
>>
>> Now I'm not sure if it's the value of $R which is
>> wrong or the awk line itself is mangled... nor can I find
>> where these are defined. Nor can I understand why it's just
>> affecting me :)
>
> The awk line looks wrong to me.  I *think* it should be awk -f
> $S/solenv/gbuild/processdeps.awk.  I'm not sure where this is coming
> from, though.  The platform-specific gbuild makefiles contain this:
>  $(gb_AWK) -f $(GBUILDDIR)/processdeps.awk
> and apr-util sets this:
>  GBUILDDIR := $(SOLARENV)/gbuild
> What is SOLARENV set to in your environment?
>
> Unfortunately it will be a while before I can spin up my windows VM to
> look at this.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
In reply to this post by Don Lewis-2

> On Aug 8, 2017, at 12:59 PM, Don Lewis <[hidden email]> wrote:
>
> On  8 Aug, Jim Jagielski wrote:
>> It looks like some sort of variable interpolation issue... Note
>> that it's trying to do:
>>
>>    - | awk -f C:/cygwin$S/solenv/gbuild/processdeps.awk
>>
>> Now with:
>>
>>    S=$R/main
>>    R=c:/cygwin/home/jim/src/asf/aoo-414
>>
>> you can see how what comes out is:
>>
>>    - | awk -f C:/cygwinc:/cygwin/home/jim/src/asf/aoo-414/main
>>
>> Now I'm not sure if it's the value of $R which is
>> wrong or the awk line itself is mangled... nor can I find
>> where these are defined. Nor can I understand why it's just
>> affecting me :)
>
> The awk line looks wrong to me.  I *think* it should be awk -f
> $S/solenv/gbuild/processdeps.awk.  I'm not sure where this is coming
> from, though.  The platform-specific gbuild makefiles contain this:
>  $(gb_AWK) -f $(GBUILDDIR)/processdeps.awk
> and apr-util sets this:
>  GBUILDDIR := $(SOLARENV)/gbuild
> What is SOLARENV set to in your environment?
>

SOLARENV=C:/cygwin/home/jim/src/asf/aoo-414/main/solenv

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
I've tried reinstalling, putting stuff in different locations,
etc... I just cannot get aoo-414 building on my windows7 VM.
I am following the step-by-step guide to the letter.

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Patricia Shanahan
Have you tried repeating "build --all" a few times?

I quite often have failures that go away with a few repeated builds. My
interpretation is that whatever is supposed to make sure all
dependencies are satisfied before building a module does not quite work
right. Sooner or later, everything that is needed does get built, and
the build can proceed.


On 8/11/2017 7:30 AM, Jim Jagielski wrote:
> I've tried reinstalling, putting stuff in different locations,
> etc... I just cannot get aoo-414 building on my windows7 VM.
> I am following the step-by-step guide to the letter.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
Yep... I've disabled using '--P2 -- --P2' as well, in
case it's something about parallel jobs, etc.

Weird as anything. The only thing I can think of is that
the links on the step-to-step guide are pointing to newer
versions of things, which is what is breaking my win7 builds.

I may try w/ a super-bare bones ./configure setup and see
how far I can go.

> On Aug 11, 2017, at 10:33 AM, Patricia Shanahan <[hidden email]> wrote:
>
> Have you tried repeating "build --all" a few times?
>
> I quite often have failures that go away with a few repeated builds. My interpretation is that whatever is supposed to make sure all dependencies are satisfied before building a module does not quite work right. Sooner or later, everything that is needed does get built, and the build can proceed.
>
>
> On 8/11/2017 7:30 AM, Jim Jagielski wrote:
>> I've tried reinstalling, putting stuff in different locations,
>> etc... I just cannot get aoo-414 building on my windows7 VM.
>> I am following the step-by-step guide to the letter.
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Matthias Seidel
FWIW, my builds never require multiple steps and I always build with
"build --all -P2 -- -P2"

The environment is important, you can see my setup for RC1 here:

http://svn.apache.org/repos/asf/openoffice/devtools/build-scripts/4.1.4/wntmsci/ReadMe.txt


Am 11.08.2017 um 16:39 schrieb Jim Jagielski:

> Yep... I've disabled using '--P2 -- --P2' as well, in
> case it's something about parallel jobs, etc.
>
> Weird as anything. The only thing I can think of is that
> the links on the step-to-step guide are pointing to newer
> versions of things, which is what is breaking my win7 builds.
>
> I may try w/ a super-bare bones ./configure setup and see
> how far I can go.
>
>> On Aug 11, 2017, at 10:33 AM, Patricia Shanahan <[hidden email]> wrote:
>>
>> Have you tried repeating "build --all" a few times?
>>
>> I quite often have failures that go away with a few repeated builds. My interpretation is that whatever is supposed to make sure all dependencies are satisfied before building a module does not quite work right. Sooner or later, everything that is needed does get built, and the build can proceed.
>>
>>
>> On 8/11/2017 7:30 AM, Jim Jagielski wrote:
>>> I've tried reinstalling, putting stuff in different locations,
>>> etc... I just cannot get aoo-414 building on my windows7 VM.
>>> I am following the step-by-step guide to the letter.
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
I wonder if it's because I'm on Win7, Home Premium.

The list of installed s/w looks correct:

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
In reply to this post by Matthias Seidel
I wonder if it's because I'm on Win7, Home Premium.

The list of installed s/w looks correct:

    http://home.apache.org/~jim/AOO-builds/aoobuilder-sw.png

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Matthias Seidel
No, I initially build with Win 7 Home 32bit before I switched to Win 10
Pro 64bit (just to see if it works...).

The installed software looks good.
You could deinstall all (3) Versions of MS Visual C++ 2008
Redistributable 9.0.30729 leaving only the two with 9.0.30729.6161.


Am 11.08.2017 um 18:37 schrieb Jim Jagielski:

> I wonder if it's because I'm on Win7, Home Premium.
>
> The list of installed s/w looks correct:
>
>     http://home.apache.org/~jim/AOO-builds/aoobuilder-sw.png
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
Considering that the build system for OO depends on pollution, oops,
I mean *population* of the environment, I just wonder if that may
be an issue.

Are you using the default bash* startup scripts? Any modifications?
That sort of thing?

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Matthias Seidel
Am 12.08.2017 um 15:14 schrieb Jim Jagielski:
> Considering that the build system for OO depends on pollution, oops,
> I mean *population* of the environment, I just wonder if that may
> be an issue.
>
> Are you using the default bash* startup scripts? Any modifications?
> That sort of thing?

I never used a script because I had too many different configure
switches that I tested alternating.
Maybe after 4.1.4 is released I will create one... ;-)

I just type (in SourceMain):

 - autoconf
 - ./configure (with chosen switches)
 - ./bootstrap
 - source winenv.set.sh
 - cd instsetoo_native
 - build --all -P2 -- -P2

That builds all full installations (as defined in --with-lang) and the
SDK by default. The SDK can be omitted with --disable-odk.

>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>



smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Jim Jagielski
Can you provide what 'echo $PATH' shows before autoconf and
after the sourcing of winenv.set.sh?

tia!

> On Aug 12, 2017, at 9:45 AM, Matthias Seidel <[hidden email]> wrote:
>
> Am 12.08.2017 um 15:14 schrieb Jim Jagielski:
>> Considering that the build system for OO depends on pollution, oops,
>> I mean *population* of the environment, I just wonder if that may
>> be an issue.
>>
>> Are you using the default bash* startup scripts? Any modifications?
>> That sort of thing?
>
> I never used a script because I had too many different configure
> switches that I tested alternating.
> Maybe after 4.1.4 is released I will create one... ;-)
>
> I just type (in SourceMain):
>
> - autoconf
> - ./configure (with chosen switches)
> - ./bootstrap
> - source winenv.set.sh
> - cd instsetoo_native
> - build --all -P2 -- -P2
>
> That builds all full installations (as defined in --with-lang) and the
> SDK by default. The SDK can be omitted with --disable-odk.
>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows build woes

Matthias Seidel
Am 12.08.2017 um 15:56 schrieb Jim Jagielski:
> Can you provide what 'echo $PATH' shows before autoconf and
> after the sourcing of winenv.set.sh?
>
> tia!

Sure!

Before "autoconf":

$ echo $PATH
/usr/local/bin:/usr/bin:/cygdrive/c/ProgramData/Oracle/Java/javapath:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Users/Seidel/AppData/Local/Microsoft/WindowsApps

After "source winenv.set.sh":

$ echo $PATH
.:/cygdrive/c/Source/aoo-414/main/solenv/bin:/cygdrive/c/Source/aoo-414/main/solenv/wntmsci12.pro/bin:/cygdrive/c/PROGRA~2/Java/JDK17~1.0_8/bin:/cygdrive/c/PROGRA~2/Java/JDK17~1.0_8/jre/bin/client:/cygdrive/c/PROGRA~2/MICROS~1.0/VC/bin:/cygdrive/c/PROGRA~2/MICROS~1.0/Common7/IDE:/cygdrive/c/MICROS~1/Windows/v7.0/bin:/cygdrive/c/Windows/MICROS~1.NET/FRAMEW~1/v3.5:/cygdrive/c/Microsoft_SDKs/Windows/v7.0/bin:/cygdrive/c/PROGRA~2/MICROS~1.0/VC/bin:/usr/bin:/cygdrive/c/NSIS:/usr/local/bin:/cygdrive/c/ProgramData/Oracle/Java/javapath:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Users/Seidel/AppData/Local/Microsoft/WindowsApps

>
>> On Aug 12, 2017, at 9:45 AM, Matthias Seidel <[hidden email]> wrote:
>>
>> Am 12.08.2017 um 15:14 schrieb Jim Jagielski:
>>> Considering that the build system for OO depends on pollution, oops,
>>> I mean *population* of the environment, I just wonder if that may
>>> be an issue.
>>>
>>> Are you using the default bash* startup scripts? Any modifications?
>>> That sort of thing?
>> I never used a script because I had too many different configure
>> switches that I tested alternating.
>> Maybe after 4.1.4 is released I will create one... ;-)
>>
>> I just type (in SourceMain):
>>
>> - autoconf
>> - ./configure (with chosen switches)
>> - ./bootstrap
>> - source winenv.set.sh
>> - cd instsetoo_native
>> - build --all -P2 -- -P2
>>
>> That builds all full installations (as defined in --with-lang) and the
>> SDK by default. The SDK can be omitted with --disable-odk.
>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>


smime.p7s (5K) Download Attachment
Loading...