pi 4 port update

classic Classic list List threaded Threaded
18 messages Options
Reply | Threaded
Open this post in threaded view
|

pi 4 port update

marcia wilbur
Hi.

So far, so good. Not totally there but did pass dmake stage. :)

root@raspberrypi:/home/pi/aoo/main# lscpu
Architecture:        armv7l
Byte Order:          Little Endian
CPU(s):              4
On-line CPU(s) list: 0-3
Thread(s) per core:  1
Core(s) per socket:  4
Socket(s):           1
Vendor ID:           ARM
Model:               3
Model name:          Cortex-A72
Stepping:            r0p3
CPU max MHz:         1500.0000
CPU min MHz:         600.0000
BogoMIPS:            270.00
Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32


Debian Buster (raspbian)
Old kernel (will update later)
Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux


dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake


-sleepless in Arizona :)

... stayed tuned

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Pedro Lino-4
Hi Marcia

I have been looking for an excuse to buy a Pi :)
OpenOffice on Pi would be a very good one!
Would that be compatible with a Pi 3?

Thanks!

Regards,
Pedro

> On 10/19/2020 10:15 AM marcia wilbur <[hidden email]> wrote:
>
>  
> Hi.
>
> So far, so good. Not totally there but did pass dmake stage. :)
>
> root@raspberrypi:/home/pi/aoo/main# lscpu
> Architecture:        armv7l
> Byte Order:          Little Endian
> CPU(s):              4
> On-line CPU(s) list: 0-3
> Thread(s) per core:  1
> Core(s) per socket:  4
> Socket(s):           1
> Vendor ID:           ARM
> Model:               3
> Model name:          Cortex-A72
> Stepping:            r0p3
> CPU max MHz:         1500.0000
> CPU min MHz:         600.0000
> BogoMIPS:            270.00
> Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
>
>
> Debian Buster (raspbian)
> Old kernel (will update later)
> Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
>
>
> dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake
>
>
> -sleepless in Arizona :)
>
> ... stayed tuned
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Matthias Seidel
In reply to this post by marcia wilbur
Hi Marcia,

This is great news!

I have a Raspberry Pi 3 sitting in a nice pi-topCEED [1] waiting to
test! ;-)

Regards,

   Matthias

[1] https://www.pi-top.com/products/pi-top-ceed

Am 19.10.20 um 11:15 schrieb marcia wilbur:

> Hi.
>
> So far, so good. Not totally there but did pass dmake stage. :)
>
> root@raspberrypi:/home/pi/aoo/main# lscpu
> Architecture:        armv7l
> Byte Order:          Little Endian
> CPU(s):              4
> On-line CPU(s) list: 0-3
> Thread(s) per core:  1
> Core(s) per socket:  4
> Socket(s):           1
> Vendor ID:           ARM
> Model:               3
> Model name:          Cortex-A72
> Stepping:            r0p3
> CPU max MHz:         1500.0000
> CPU min MHz:         600.0000
> BogoMIPS:            270.00
> Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
>
>
> Debian Buster (raspbian)
> Old kernel (will update later)
> Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
>
>
> dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake
>
>
> -sleepless in Arizona :)
>
> ... stayed tuned
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Peter Kovacs-3
In reply to this post by marcia wilbur
Nice step one :)

This looks like fun :-)

Am 19.10.20 um 11:15 schrieb marcia wilbur:

> Hi.
>
> So far, so good. Not totally there but did pass dmake stage. :)
>
> root@raspberrypi:/home/pi/aoo/main# lscpu
> Architecture:        armv7l
> Byte Order:          Little Endian
> CPU(s):              4
> On-line CPU(s) list: 0-3
> Thread(s) per core:  1
> Core(s) per socket:  4
> Socket(s):           1
> Vendor ID:           ARM
> Model:               3
> Model name:          Cortex-A72
> Stepping:            r0p3
> CPU max MHz:         1500.0000
> CPU min MHz:         600.0000
> BogoMIPS:            270.00
> Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
>
>
> Debian Buster (raspbian)
> Old kernel (will update later)
> Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
>
>
> dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake
>
>
> -sleepless in Arizona :)
>
> ... stayed tuned
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Marcus (OOo)
In reply to this post by marcia wilbur
Great news. :-)

Thanks for sharing this with us.

Marcus



Am 19.10.20 um 11:15 schrieb marcia wilbur:

> So far, so good. Not totally there but did pass dmake stage. :)
>
> root@raspberrypi:/home/pi/aoo/main# lscpu
> Architecture:        armv7l
> Byte Order:          Little Endian
> CPU(s):              4
> On-line CPU(s) list: 0-3
> Thread(s) per core:  1
> Core(s) per socket:  4
> Socket(s):           1
> Vendor ID:           ARM
> Model:               3
> Model name:          Cortex-A72
> Stepping:            r0p3
> CPU max MHz:         1500.0000
> CPU min MHz:         600.0000
> BogoMIPS:            270.00
> Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
>
>
> Debian Buster (raspbian)
> Old kernel (will update later)
> Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
>
>
> dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake
>
>
> -sleepless in Arizona :)
>
> ... stayed tuned


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Matthias Seidel
In reply to this post by marcia wilbur
Hi Marcia,

Christmas is nearing and a Raspberry Pi 400 [1] would make a great present!
Somehow I will have to be Santa myself. ;-)

Any news on the ARM port?

Regards,

   Matthias

[1] https://www.raspberrypi.org/products/raspberry-pi-400

Am 19.10.20 um 11:15 schrieb marcia wilbur:

> Hi.
>
> So far, so good. Not totally there but did pass dmake stage. :)
>
> root@raspberrypi:/home/pi/aoo/main# lscpu
> Architecture:        armv7l
> Byte Order:          Little Endian
> CPU(s):              4
> On-line CPU(s) list: 0-3
> Thread(s) per core:  1
> Core(s) per socket:  4
> Socket(s):           1
> Vendor ID:           ARM
> Model:               3
> Model name:          Cortex-A72
> Stepping:            r0p3
> CPU max MHz:         1500.0000
> CPU min MHz:         600.0000
> BogoMIPS:            270.00
> Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
>
>
> Debian Buster (raspbian)
> Old kernel (will update later)
> Linux raspberrypi 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
>
>
> dmake successfully built and copied to /home/pi/aoo/main/solenv/unxlngr.pro/bin/dmake
>
>
> -sleepless in Arizona :)
>
> ... stayed tuned
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Bidouille
Hello,

> Any news on the ARM port?

Eric Bachard has submitted a patch here:
https://bz.apache.org/ooo/show_bug.cgi?id=127040

I don't know if this will help :-/

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Matthias Seidel
Hi,

Am 03.11.20 um 17:08 schrieb Bidouille:
> Hello,
>
>> Any news on the ARM port?
> Eric Bachard has submitted a patch here:
> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>
> I don't know if this will help :-/

Maybe Marcia is able to merge it?

It seems to be for ARM32, but that would be a start!

Regards,

   Matthias

>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
Hi - so many dependency errors on pi4 buster.
Did i see a post where someone got debian 4.1.8 working?
Maybe I should try this...?

----- Original Message -----
From: "Matthias Seidel" <[hidden email]>
To: [hidden email]
Sent: Tuesday, November 3, 2020 9:21:2i9 AM
Subject: Re: pi 4 port update

Hi,

Am 03.11.20 um 17:08 schrieb Bidouille:
> Hello,
>
>> Any news on the ARM port?
> Eric Bachard has submitted a patch here:
> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>
> I don't know if this will help :-/

Maybe Marcia is able to merge it?

It seems to be for ARM32, but that would be a start!

Regards,

   Matthias

>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Peter Kovacs-3
Hi Marcia,

I am curious.

what kind of dependency error do you have?


All the best

Peter

Am 08.11.20 um 08:53 schrieb marcia wilbur:

> Hi - so many dependency errors on pi4 buster.
> Did i see a post where someone got debian 4.1.8 working?
> Maybe I should try this...?
>
> ----- Original Message -----
> From: "Matthias Seidel" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
> Subject: Re: pi 4 port update
>
> Hi,
>
> Am 03.11.20 um 17:08 schrieb Bidouille:
>> Hello,
>>
>>> Any news on the ARM port?
>> Eric Bachard has submitted a patch here:
>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>
>> I don't know if this will help :-/
> Maybe Marcia is able to merge it?
>
> It seems to be for ARM32, but that would be a start!
>
> Regards,
>
>     Matthias
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
Hi Peter,

Currently cosv on pi.

I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
Will try again tonight.

----- Original Message -----
From: "Peter Kovacs" <[hidden email]>
To: [hidden email]
Sent: Sunday, November 8, 2020 3:43:06 AM
Subject: Re: pi 4 port update

Hi Marcia,

I am curious.

what kind of dependency error do you have?


All the best

Peter

Am 08.11.20 um 08:53 schrieb marcia wilbur:

> Hi - so many dependency errors on pi4 buster.
> Did i see a post where someone got debian 4.1.8 working?
> Maybe I should try this...?
>
> ----- Original Message -----
> From: "Matthias Seidel" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
> Subject: Re: pi 4 port update
>
> Hi,
>
> Am 03.11.20 um 17:08 schrieb Bidouille:
>> Hello,
>>
>>> Any news on the ARM port?
>> Eric Bachard has submitted a patch here:
>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>
>> I don't know if this will help :-/
> Maybe Marcia is able to merge it?
>
> It seems to be for ARM32, but that would be a start!
>
> Regards,
>
>     Matthias
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
Tried 4.1.9 - again. stopped at cosv

What am I doing wrong...

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, November 10, 2020 5:43:34 PM
Subject: Re: pi 4 port update

Hi Peter,

Currently cosv on pi.

I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
Will try again tonight.

----- Original Message -----
From: "Peter Kovacs" <[hidden email]>
To: [hidden email]
Sent: Sunday, November 8, 2020 3:43:06 AM
Subject: Re: pi 4 port update

Hi Marcia,

I am curious.

what kind of dependency error do you have?


All the best

Peter

Am 08.11.20 um 08:53 schrieb marcia wilbur:

> Hi - so many dependency errors on pi4 buster.
> Did i see a post where someone got debian 4.1.8 working?
> Maybe I should try this...?
>
> ----- Original Message -----
> From: "Matthias Seidel" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
> Subject: Re: pi 4 port update
>
> Hi,
>
> Am 03.11.20 um 17:08 schrieb Bidouille:
>> Hello,
>>
>>> Any news on the ARM port?
>> Eric Bachard has submitted a patch here:
>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>
>> I don't know if this will help :-/
> Maybe Marcia is able to merge it?
>
> It seems to be for ARM32, but that would be a start!
>
> Regards,
>
>     Matthias
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Matthias Seidel
Hi Marcia,

I don't know when exactly someone was able to build on ARM.
We have a lot of outstanding patches, maybe they need to be merged first?

You build on Raspberry Pi OS? that is based on Debian, 32-bit?

Regards,

   Matthias

Am 12.01.21 um 17:38 schrieb marcia wilbur:

> Tried 4.1.9 - again. stopped at cosv
>
> What am I doing wrong...
>
> ----- Original Message -----
> From: "marcia wilbur" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 10, 2020 5:43:34 PM
> Subject: Re: pi 4 port update
>
> Hi Peter,
>
> Currently cosv on pi.
>
> I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
> Will try again tonight.
>
> ----- Original Message -----
> From: "Peter Kovacs" <[hidden email]>
> To: [hidden email]
> Sent: Sunday, November 8, 2020 3:43:06 AM
> Subject: Re: pi 4 port update
>
> Hi Marcia,
>
> I am curious.
>
> what kind of dependency error do you have?
>
>
> All the best
>
> Peter
>
> Am 08.11.20 um 08:53 schrieb marcia wilbur:
>> Hi - so many dependency errors on pi4 buster.
>> Did i see a post where someone got debian 4.1.8 working?
>> Maybe I should try this...?
>>
>> ----- Original Message -----
>> From: "Matthias Seidel" <[hidden email]>
>> To: [hidden email]
>> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
>> Subject: Re: pi 4 port update
>>
>> Hi,
>>
>> Am 03.11.20 um 17:08 schrieb Bidouille:
>>> Hello,
>>>
>>>> Any news on the ARM port?
>>> Eric Bachard has submitted a patch here:
>>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>>
>>> I don't know if this will help :-/
>> Maybe Marcia is able to merge it?
>>
>> It seems to be for ARM32, but that would be a start!
>>
>> Regards,
>>
>>     Matthias
>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>


smime.p7s (5K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
In reply to this post by marcia wilbur
So,
Here's the error...
make: *** No rule to make target '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/CxxObject/cosv/source/service/comdline.o', needed by '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/LinkTarget/StaticLibrary/libcosv.a'.  Stop.
dmake:  Error code 2, while making 'all'

1 module(s):
        cosv
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /home/aicra/419/openoffice/main/cosv/prj

I tried to force a build in cosv.
Didn't work. Had an error
compilation terminated.
Starting fresh again.

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, January 12, 2021 9:38:02 AM
Subject: Re: pi 4 port update

Tried 4.1.9 - again. stopped at cosv

What am I doing wrong...

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, November 10, 2020 5:43:34 PM
Subject: Re: pi 4 port update

Hi Peter,

Currently cosv on pi.

I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
Will try again tonight.

----- Original Message -----
From: "Peter Kovacs" <[hidden email]>
To: [hidden email]
Sent: Sunday, November 8, 2020 3:43:06 AM
Subject: Re: pi 4 port update

Hi Marcia,

I am curious.

what kind of dependency error do you have?


All the best

Peter

Am 08.11.20 um 08:53 schrieb marcia wilbur:

> Hi - so many dependency errors on pi4 buster.
> Did i see a post where someone got debian 4.1.8 working?
> Maybe I should try this...?
>
> ----- Original Message -----
> From: "Matthias Seidel" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
> Subject: Re: pi 4 port update
>
> Hi,
>
> Am 03.11.20 um 17:08 schrieb Bidouille:
>> Hello,
>>
>>> Any news on the ARM port?
>> Eric Bachard has submitted a patch here:
>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>
>> I don't know if this will help :-/
> Maybe Marcia is able to merge it?
>
> It seems to be for ARM32, but that would be a start!
>
> Regards,
>
>     Matthias
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
Mathias,

I was trying on the pi ARM.
Then, I moved Debian - x86 and had a similar error.

I figured I'd try on desktop first, right - then port.
But had similar errors.

I am following the build guide.
Had a few issues like hsqldb and now cosv.

what version of gcc is preferred?
I'm using 8.3.0

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, January 12, 2021 10:12:37 AM
Subject: Re: pi 4 port update

So,
Here's the error...
make: *** No rule to make target '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/CxxObject/cosv/source/service/comdline.o', needed by '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/LinkTarget/StaticLibrary/libcosv.a'.  Stop.
dmake:  Error code 2, while making 'all'

1 module(s):
        cosv
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /home/aicra/419/openoffice/main/cosv/prj

I tried to force a build in cosv.
Didn't work. Had an error
compilation terminated.
Starting fresh again.

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, January 12, 2021 9:38:02 AM
Subject: Re: pi 4 port update

Tried 4.1.9 - again. stopped at cosv

What am I doing wrong...

----- Original Message -----
From: "marcia wilbur" <[hidden email]>
To: [hidden email]
Sent: Tuesday, November 10, 2020 5:43:34 PM
Subject: Re: pi 4 port update

Hi Peter,

Currently cosv on pi.

I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
Will try again tonight.

----- Original Message -----
From: "Peter Kovacs" <[hidden email]>
To: [hidden email]
Sent: Sunday, November 8, 2020 3:43:06 AM
Subject: Re: pi 4 port update

Hi Marcia,

I am curious.

what kind of dependency error do you have?


All the best

Peter

Am 08.11.20 um 08:53 schrieb marcia wilbur:

> Hi - so many dependency errors on pi4 buster.
> Did i see a post where someone got debian 4.1.8 working?
> Maybe I should try this...?
>
> ----- Original Message -----
> From: "Matthias Seidel" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
> Subject: Re: pi 4 port update
>
> Hi,
>
> Am 03.11.20 um 17:08 schrieb Bidouille:
>> Hello,
>>
>>> Any news on the ARM port?
>> Eric Bachard has submitted a patch here:
>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>
>> I don't know if this will help :-/
> Maybe Marcia is able to merge it?
>
> It seems to be for ARM32, but that would be a start!
>
> Regards,
>
>     Matthias
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Jim Jagielski
In reply to this post by marcia wilbur
This is weird. You say you are trying to build 4.1.9 but the solver version is 4.5.0 (trunk).
Are you *SURE* you're on the AOO419 branch?


> On Jan 12, 2021, at 12:12 PM, marcia wilbur <[hidden email]> wrote:
>
> So,
> Here's the error...
> make: *** No rule to make target '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/CxxObject/cosv/source/service/comdline.o', needed by '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/LinkTarget/StaticLibrary/libcosv.a'.  Stop.
> dmake:  Error code 2, while making 'all'
>
> 1 module(s):
> cosv
> need(s) to be rebuilt
>
> Reason(s):
>
> ERROR: error 65280 occurred while making /home/aicra/419/openoffice/main/cosv/prj
>
> I tried to force a build in cosv.
> Didn't work. Had an error
> compilation terminated.
> Starting fresh again.
>
> ----- Original Message -----
> From: "marcia wilbur" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, January 12, 2021 9:38:02 AM
> Subject: Re: pi 4 port update
>
> Tried 4.1.9 - again. stopped at cosv
>
> What am I doing wrong...
>
> ----- Original Message -----
> From: "marcia wilbur" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 10, 2020 5:43:34 PM
> Subject: Re: pi 4 port update
>
> Hi Peter,
>
> Currently cosv on pi.
>
> I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
> Will try again tonight.
>
> ----- Original Message -----
> From: "Peter Kovacs" <[hidden email]>
> To: [hidden email]
> Sent: Sunday, November 8, 2020 3:43:06 AM
> Subject: Re: pi 4 port update
>
> Hi Marcia,
>
> I am curious.
>
> what kind of dependency error do you have?
>
>
> All the best
>
> Peter
>
> Am 08.11.20 um 08:53 schrieb marcia wilbur:
>> Hi - so many dependency errors on pi4 buster.
>> Did i see a post where someone got debian 4.1.8 working?
>> Maybe I should try this...?
>>
>> ----- Original Message -----
>> From: "Matthias Seidel" <[hidden email]>
>> To: [hidden email]
>> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
>> Subject: Re: pi 4 port update
>>
>> Hi,
>>
>> Am 03.11.20 um 17:08 schrieb Bidouille:
>>> Hello,
>>>
>>>> Any news on the ARM port?
>>> Eric Bachard has submitted a patch here:
>>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>>
>>> I don't know if this will help :-/
>> Maybe Marcia is able to merge it?
>>
>> It seems to be for ARM32, but that would be a start!
>>
>> Regards,
>>
>>    Matthias
>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

marcia wilbur
Nope. I was in error. for this build I did clone from the github repo available in the build instructions.

looks like - some version from aug 19

Let me see if I can find the source for 4.19.



----- Original Message -----
From: "Jim Jagielski" <[hidden email]>
To: "dev" <[hidden email]>
Sent: Tuesday, January 12, 2021 10:23:06 AM
Subject: Re: pi 4 port update

This is weird. You say you are trying to build 4.1.9 but the solver version is 4.5.0 (trunk).
Are you *SURE* you're on the AOO419 branch?


> On Jan 12, 2021, at 12:12 PM, marcia wilbur <[hidden email]> wrote:
>
> So,
> Here's the error...
> make: *** No rule to make target '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/CxxObject/cosv/source/service/comdline.o', needed by '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/LinkTarget/StaticLibrary/libcosv.a'.  Stop.
> dmake:  Error code 2, while making 'all'
>
> 1 module(s):
> cosv
> need(s) to be rebuilt
>
> Reason(s):
>
> ERROR: error 65280 occurred while making /home/aicra/419/openoffice/main/cosv/prj
>
> I tried to force a build in cosv.
> Didn't work. Had an error
> compilation terminated.
> Starting fresh again.
>
> ----- Original Message -----
> From: "marcia wilbur" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, January 12, 2021 9:38:02 AM
> Subject: Re: pi 4 port update
>
> Tried 4.1.9 - again. stopped at cosv
>
> What am I doing wrong...
>
> ----- Original Message -----
> From: "marcia wilbur" <[hidden email]>
> To: [hidden email]
> Sent: Tuesday, November 10, 2020 5:43:34 PM
> Subject: Re: pi 4 port update
>
> Hi Peter,
>
> Currently cosv on pi.
>
> I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
> Will try again tonight.
>
> ----- Original Message -----
> From: "Peter Kovacs" <[hidden email]>
> To: [hidden email]
> Sent: Sunday, November 8, 2020 3:43:06 AM
> Subject: Re: pi 4 port update
>
> Hi Marcia,
>
> I am curious.
>
> what kind of dependency error do you have?
>
>
> All the best
>
> Peter
>
> Am 08.11.20 um 08:53 schrieb marcia wilbur:
>> Hi - so many dependency errors on pi4 buster.
>> Did i see a post where someone got debian 4.1.8 working?
>> Maybe I should try this...?
>>
>> ----- Original Message -----
>> From: "Matthias Seidel" <[hidden email]>
>> To: [hidden email]
>> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
>> Subject: Re: pi 4 port update
>>
>> Hi,
>>
>> Am 03.11.20 um 17:08 schrieb Bidouille:
>>> Hello,
>>>
>>>> Any news on the ARM port?
>>> Eric Bachard has submitted a patch here:
>>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>>
>>> I don't know if this will help :-/
>> Maybe Marcia is able to merge it?
>>
>> It seems to be for ARM32, but that would be a start!
>>
>> Regards,
>>
>>    Matthias
>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: pi 4 port update

Peter Kovacs-3
I would try to build the cosv module "alone".

Go into the cosv folder and then enter make.

The line which builds the comdline.o is (I think)

Package_inc.mk:$(eval $(call gb_Package_add_file,cosv_inc,inc/cosv/comdline.hxx,comdline.hxx))

And the static library is defined I think in StaticLibrary_cosv.mk
So maybe this is some sort of gmake Issue?

On 12.01.21 18:37, marcia wilbur wrote:

> Nope. I was in error. for this build I did clone from the github repo available in the build instructions.
>
> looks like - some version from aug 19
>
> Let me see if I can find the source for 4.19.
>
>
>
> ----- Original Message -----
> From: "Jim Jagielski" <[hidden email]>
> To: "dev" <[hidden email]>
> Sent: Tuesday, January 12, 2021 10:23:06 AM
> Subject: Re: pi 4 port update
>
> This is weird. You say you are trying to build 4.1.9 but the solver version is 4.5.0 (trunk).
> Are you *SURE* you're on the AOO419 branch?
>
>
>> On Jan 12, 2021, at 12:12 PM, marcia wilbur <[hidden email]> wrote:
>>
>> So,
>> Here's the error...
>> make: *** No rule to make target '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/CxxObject/cosv/source/service/comdline.o', needed by '/home/aicra/419/openoffice/main/solver/450/unxlngx6.pro/workdir/LinkTarget/StaticLibrary/libcosv.a'.  Stop.
>> dmake:  Error code 2, while making 'all'
>>
>> 1 module(s):
>> cosv
>> need(s) to be rebuilt
>>
>> Reason(s):
>>
>> ERROR: error 65280 occurred while making /home/aicra/419/openoffice/main/cosv/prj
>>
>> I tried to force a build in cosv.
>> Didn't work. Had an error
>> compilation terminated.
>> Starting fresh again.
>>
>> ----- Original Message -----
>> From: "marcia wilbur" <[hidden email]>
>> To: [hidden email]
>> Sent: Tuesday, January 12, 2021 9:38:02 AM
>> Subject: Re: pi 4 port update
>>
>> Tried 4.1.9 - again. stopped at cosv
>>
>> What am I doing wrong...
>>
>> ----- Original Message -----
>> From: "marcia wilbur" <[hidden email]>
>> To: [hidden email]
>> Sent: Tuesday, November 10, 2020 5:43:34 PM
>> Subject: Re: pi 4 port update
>>
>> Hi Peter,
>>
>> Currently cosv on pi.
>>
>> I think I will start fresh - install what depends I can prior. or... if i can fix cosv and start from there...
>> Will try again tonight.
>>
>> ----- Original Message -----
>> From: "Peter Kovacs" <[hidden email]>
>> To: [hidden email]
>> Sent: Sunday, November 8, 2020 3:43:06 AM
>> Subject: Re: pi 4 port update
>>
>> Hi Marcia,
>>
>> I am curious.
>>
>> what kind of dependency error do you have?
>>
>>
>> All the best
>>
>> Peter
>>
>> Am 08.11.20 um 08:53 schrieb marcia wilbur:
>>> Hi - so many dependency errors on pi4 buster.
>>> Did i see a post where someone got debian 4.1.8 working?
>>> Maybe I should try this...?
>>>
>>> ----- Original Message -----
>>> From: "Matthias Seidel" <[hidden email]>
>>> To: [hidden email]
>>> Sent: Tuesday, November 3, 2020 9:21:2i9 AM
>>> Subject: Re: pi 4 port update
>>>
>>> Hi,
>>>
>>> Am 03.11.20 um 17:08 schrieb Bidouille:
>>>> Hello,
>>>>
>>>>> Any news on the ARM port?
>>>> Eric Bachard has submitted a patch here:
>>>> https://bz.apache.org/ooo/show_bug.cgi?id=127040
>>>>
>>>> I don't know if this will help :-/
>>> Maybe Marcia is able to merge it?
>>>
>>> It seems to be for ARM32, but that would be a start!
>>>
>>> Regards,
>>>
>>>     Matthias
>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [hidden email]
>>>> For additional commands, e-mail: [hidden email]
>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [hidden email]
>>> For additional commands, e-mail: [hidden email]
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
--
This is the Way! http://www.apache.org/theapacheway/index.html

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]